Protect Machines from Premature Wear with Soft-Start Valves

No comments

Guest Contributor, SMC USA

Best Practices 4.0 1

Optimizing machine productivity can manifest itself in many different forms such as: operating 24/7, running production lines at maximum throughput or minimizing machine downtime. One way to reduce machine downtime is by increasing its overall lifecycle or by extending the interval between regularly scheduled maintenance and repair.

A machine is subject to additional stress and risks to premature wear when it is powered up and pressurized with compressed air after a scheduled shut-down or a safety event. The surge in air pressure will create rapid movements in the actuators that can cause premature wear or may even escalate into a hazardous situation.

One solution is to slowly and incrementally increase the air pressure into the machine until a preset air pressure threshold is achieved before fully pressurizing the machine’s air system. This will help avoid a harsh start and facilitate a soft-start to all downstream components. The advantages will be that downstream components will move slowly into position, allowing opposing air pressure to accumulate in the actuators, in order to create enough air volume to meter out and protect from a runaway cylinder.

SMC’s soft start-up valve, AV Series, will gradually increase system air pressure until 50% is achieved, then its main valve will open to complete full pressurization.

The installation of the AV Series soft start-up valve requires that a machine’s compressed airline be free of any large volume leaks. It may not achieve 50% pressurization and as a result not fully open. Also, venturi type vacuum generators that are present downstream from the AV soft start-up valve will function like an air leak.av frlcombo_499x379

Features: 

  • Operating pressure: 29 – 145 psi, (0.2 – 1.0 MPa)
  • Voltage: 12, 24 VDC, 100, 110~120, 200, 220 VAC
  • Flow direction: Left to Right, Right to Left
  • Modular assembly with FRL units
  • UL Recognized, CE Compliant

Available in:

  • Inch Thread: 1/4”, 3/8”, 1/2″, 3/4”, 1” NPT
  • BSPT (ISO 7) Thread: 1/4”, 3/8”, 1/2″, 3/4”, 1” Rc
  • BSPP (ISO 228) Thread: 1/4”, 3/8”, 1/2″, 3/4”, 1” G.

Soft Start Valve Brochure

Purchase SMC pneumatic valves online at www.cmafh.com

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s